Bingo
Pinballs
Date
Created Unknown
From: steve k <
kaufman37>
Subject: Re: super six cards
To: "Danny Leach" <bingop...
Date: Thursday, March 10, 2011, 8:58 AM
Danny,
Made a little progress today on super six, the back
of the mpu board says made in Italy
~
From: steve k
<kaufman37>
Subject: Re: super six cards
To: "Danny Leach" <bingopinballs>
Date: Tuesday, March 8, 2011, 3:45 PM
Hi Danny,
ok the only board that has a part number is the lamp
driver
lda m-645-455
there are 2 of them
none of the other boards has any identification
now there is a remote-control receiver board, but no
part number either
originally i thought super
six cards was like the euro continental, until i
came across the bally continental
schematics and seen that everything pretty much
matched.
On the playfield wiring from the bally continental
schematics return 62-1 bbp1-10
is the circuit im having
trouble with.
Im hoping to get a short video of whats going on to send to you in a day or two.
My friend hasnt had time
to help for the past few weeks, but maybe this friday. one
thing i noticed
about the artwork is its got a lot of purple compared to other machines
that has the same playfied
and this machine also has a plug up front i guess for the keyboard display unit, as shown in the
bally continental manual.
thanks
steve
~ Steve K _ You Rock!! ~
|
