Mr. Pinball Tip:
Many Bally bingos have a design that causes a tilt if the coin switch is activated too slowly. This is intended so that it will tilt when someone tries to cheat using a string or wire to activate the switch instead of a coin. This often is a problem in home use when you're not using coins and just tripping the switch with your finger. To deactivate this 'feature' bend the top switch piece on #4D of the Control Unit up so that the switch cannot close. #4D is the 4th switch stack from the left on the Control Unit.
New tips are welcome and encouraged. Tips will be credited to those who contribute. If you would like to submit a tip click here.
© Copyright Mr. Pinball 2014. All Rights Reserved.